Tour Adaptive Cruise Control with Stop & Go and Traffic jam assist
Automatic distance regulation, using radar sensors to maintain the required distance between vehicles ahead by braking and accelerating. With the Stop&Go function the system brakes the car to a stop. The driver can select from 5 warning thresholds and influence the systems acceleration behaviour via Audi Drive Select. Traffic jam assist detects vehicles ahead and on ‭adjacent lanes to assist with the braking, acceleration and also steering up to 37mph, to keep the vehicle in lane.

Active Lane Assist
Detects lane boundary markings and helps the driver to stay in lane with gentle steering intervention for ‭greater convenience, particularly on motorways. Works at speeds above 37mph.

Camera based traffic sign recognition
Speed limit and traffic sign display via the Driver's Information System (DIS) or optional Head-up display. Detects the following signs: speed limits (including temporary limits), overtaking restrictions and no-entry warnings.

Turn Assist
When turning at junctions, from the moment the turn indicators are activated the turn assist system detects approaching vehicles and applies ‭braking to help avoid a collision.

Predictive efficiency assistant
The system uses navigation data e.g. speed limits, traffic signs, ‭road bends, junctions and roundabouts to give the driver efficiency advice in the instrument cluster (or via the optional ‭Audi Virtual Cockpit). In conjunction with the Adaptive Cruise Control (ACC) the system uses the route ‭data and speed limits to adjust the ACC desired speed and cornering accordingly. With automatic transmissions, the system activates freewheeling mode or engine braking. Can help reduce fuel consumption up to 10% and enhances ride comfort.

Pre-sense Front
Extends the collision warning and automatic braking function of Pre-sense City to cover the entire speed range and can also increase braking initiated by the driver if this is inadequate. The system uses the camera located on the front rear-view mirror to detect vehicles and pedestrians in front in order to reduce severity of a collision, or if possible prevent an accident. The driver is first given a visual and acoustic warning followed by partial braking and then full brake application.

Collision avoidance assistant
Supports the driver's actions during an avoidance manoeuvre reducing the likelihood of a collision or of swerving off the road. The system provides additional steering torque and uses vehicle sensors to calculate the optimum path of avoidance.